Avionics Specialist, Inc.
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
| Announcing the ASI-500 ARINC-566A Control Simulator |
|
 |
|
Description of Operation: The ASI-500-1 Control Head Simulator is a stand alone universal control system capable of controlling a wide range of communications transceivers, navigation units, ADF, DME, and transponder systems. The ASI-500 may be paired with virtually any interface panel system whenever the control application requires parallel BCD or 2x5 switching for the UUT. The ASI-500 interconnects directly to the ASI-2000 (via the supplied ASI-10-500A cable) for manual testing of Pro Line units. The ASI-500-2 is identical to the ASI-500-1 except that it also has the ability to tune 8.33 kHz spacing per ARINC-566A. An optional AC inverter (ASI-600-1) is available which mounts directly on the rear of the ASI-500. The AC Inverter converts 28vdc to 26vac 400 Hz required for VOR navigation synchro bearing excitation. The AC inverter may be purchased separate (ASI-600-1) for existing ASI-500-1's or purchased installed on the ASI-500 indicated by the AC behind the ASI-500 model number. The ASI-500 is available in four different configurations: ASI-500-1 Standard Control Head Simulator (without ARINC 566A capability) ASI-500-1AC Standard Control Head Simulator with AC Inverter (ASI-600-1) installed ASI-500-2 Control Head Simulator with ARINC 566A (8.33 kHz) capability ASI-500-2AC Control Head Simulator with ARINC 566A (8.33 kHz) capability with AC Inverter (ASI-600-1) installed. Specifications: Height: 3.50", Width: 19.00", Depth: 13.00" Power: None required or 28 vdc for AC units. Equipment Supplied: ASI-10-500A, Cable: ASI-500 to ASI-2000 Optional Equipment: ASI-600-1 AC Inverter: Converts 28 vdc to 26 vac 400 Hz. |
Simulates control of various COM, NAV, ADF, DME, and Transponder Systems. |
View the ASI On-line Test Equipment
Catalog at: |
|
| You can also use the handy form to
submit Requests
for QUOTATION, COMMENTS OR SUGGESTIONS on ASI Test equipment. For more information on ASI test equipment contact one of our Worldwide Distributors. |
|
